Ludacris
Bekanntes Mitglied
So da alle so begeistert von dem mod sind und ich den nur einmal getestet habe (war schon länger her, und lief bei mir nicht gut), werd ich den mod nun nochmal in neuer version testen.
Der Mod basiert auf der orig. 0.26b (ein grund mehr diesen mod zu testen)
Hier das changelog:
So MEINE testergebnisse werden folgen...
(meine hab ich extra groß geschrieben, da bei jedem andere ergebnisse rauskommen würden)
Natürlich könnt ihr hier auch mal eure ergebnisse oder kriterien posten.
Der Mod basiert auf der orig. 0.26b (ein grund mehr diesen mod zu testen)
Hier das changelog:
aus der sivka-features.txt
EMULE26b sivka MOD
V6b1:
------------------------
- February 11th, 2003-
-------------------------------------------------------------------------------
based on eMule 0.26b (official version)
[ADDED]
Reconnect on lowID [Tarod] (fixed version)
[ADDED]
A4AF [enkeyDEV(Ottavio84)] (fixed version)
[ADDED]
Disable Sources eXchange [Tarod]
[ADDED]
sends sources with LowID that are in same sever that client is requesting sources [Tarod]
[ADDED]
do not send incomplete established conns. to avoid sending no valid sources [Tarod]
[ADDED]
fakecheck Donkey-Fakes.de.vu + Jigle.com
[MODIFIED]
QueueSize 1000...10000
[MODIFIED]
original emule LOWIDTOLOWID was tuned (now lower CPU load)
[MODIFIED]
original emule NNS-routine was disabled (now lower CPU load)
[MODIFIED]
original emule FQS-routine was disabled (now lower CPU load)
[ADDED]
WebServer [kuchin: eMule Plus]
password 5-12 chars
[ADDED]
Save/Load sources [enkeyDEV(Ottavio84) -New SLS-]
save 25 sources
if more then 10 valid sources, then save only valid sources
[ADDED]
variable Hard Limit with auto-function (50...1000, in-/decrease depend on priority of DL-file),
hard limit will be updated with 4th takt of Timer,
hard limit per file will be initiate with value from usual used hard limit in preferences
PRIORITY HIGH or AUTO[HIGH]:
Valid sources <= 50
if you have more then 20% realy needed sources(depend on NNS,FQS,HQRS) collected,
then increase you hard limit around 25%, otherwise decrease around 1%
Valid sources > 50
if you have more then 30% realy needed sources(depend on NNS,FQS,HQRS) collected,
then increase you hard limit around 20%, otherwise decrease around 1%
PRIORITY NORMAL or AUTO[NORMAL]:
Valid sources <= 150
if you have more then 50% realy needed sources(depend on NNS,FQS,HQRS) collected,
then increase you hard limit around 15%, otherwise decrease around 1%
Valid sources > 150
if you have more then 60% realy needed sources(depend on NNS,FQS,HQRS) collected,
then increase you hard limit around 10%, otherwise decrease around 1%
PRIORITY LOW or AUTO[LOW]:
Valid sources <= 500
if you have more then 75% realy needed sources(depend on NNS,FQS,HQRS) collected,
then increase you hard limit around 5%, otherwise decrease around 1%
Valid sources > 500
if you have more then 85% realy needed sources(depend on NNS,FQS,HQRS) collected,
then increase you hard limit around 1%, otherwise decrease around 1%
[ADDED]
NNS-, FullQS-, HighQRS- and AutoHL/NOP -Timer
you can set 0...3600 second
[ADDED]
auto-drop NNSources only from DL Queue,
you can set minimum = 10%...90%,
you can set maximum = 50%...100%,
minimum <= maximum,
NNS Not Valid Src = waiting src + downloading src + not needed parts src,
auto starting the NNS-routine if NNS Not Valid Sources > MAX
auto stop the NNS-routine if NNS Not Valid Sources <= MIN
now before auto-drop and manual-drop, tring to swap to another file,
clean up -> depends on minimum values,
manual drops NNS have not restrictions (clean all NNS),
now with enableble BeepTon. (acoustic signal on droping NNS)
[ADDED]
auto-drop Full Queue Sources only from DL Queue,
you can set minimum = 10%...90%,
you can set maximum = 50%...100%,
minimum <= maximum,
FQS Not Valid Src = waiting src + downloading src
auto starting the FullQS-routine if FQS Not Valid Sources > MAX
auto stop the FQS-routine if FQS Not Valid Sources <= MIN
clean up -> depends on minimum values,
manual drops FullQS have not restrictions (clean all FullQS),
now with enableble BeepTon. (acoustic signal on droping FQS)
[ADDED]
Maximum allowed Remote Queue Rating <= X,
you can set 5...2000.
[ADDED]
auto-drop HighQRSources only from DL Queue,
you can set minimum = 10%...90%,
you can set maximum = 50%...100%,
minimum <= maximum,
HQRS Not Valid Src = waiting src + downloading src,
auto starting the HighQRS-routine if HQRS Not Valid Sources > MAX
auto stop the FQS-routine if HQRS Not Valid Sources <= MIN
clean up -> depends on minimum values,
manual drops HighQRS have not restrictions (clean all HighQRS),
now with enableble BeepTon. (acoustic signal on droping HQRS)
[BUGFIX]
transfered - column (statistic-bug in dl-window)
[BUGFIX]
Auto-Pause (for example if you HD is full, wrong values in speed column)
[BUGFIX]
show overhead bandwidth
[BUGFIX]
some level1 bugs fixed
[NOTICE]
Timer: value in seconds. Timer = 30sec, that mean checking MAX-limits are happen every 30sec, and start
only one NNS- or FQS- or HQRS-routine at the same time. for example: if NNS-routine started, then next
start of NNS-routine is in 2 mins(30sec+30sec+30sec+30ec=2 mins periode). if you have one
of NNS, FQS or HQRS disabled, then you have reduced you periode at 30sec too.
NOP = no operations (do nothing)
NNS Not Valid Sources = waiting src + downloading src + not needed parts src
FQS Not Valid Sources = waiting src + downloading src
HQRS Not Valid Sources = waiting src + downloading src
FQS Valid Sources = waiting src + downloading src - full queue src - high queue rating src
HQRS Valid Sources = waiting src + downloading src - full queue src - high queue rating src
eMule0.26b-sivka.v6b1b-bin.rar
eMule0.26b-sivka.v6b1b-src-update.rar
(source code contents only changed files, for complete SC u need last eMule0.26b official code)
Enjoy it.
So MEINE testergebnisse werden folgen...
(meine hab ich extra groß geschrieben, da bei jedem andere ergebnisse rauskommen würden)
Natürlich könnt ihr hier auch mal eure ergebnisse oder kriterien posten.